• Empty Lightsaber Hilt
• Ultrasabers Lightsaber Test
• Machined Lightsaber

How come you can control most anything about being a Jedi from appearance to performance except the hilt of the lightsaber? Hell, in Jedi Academy you choose the hilt! What kind of hilt would you choose? Ever since I saw Luke Skywalkers green saber, Ive always thought, a cheap flashlight looks bet. May 5, 2018 - The lightsaber is one of pop culture's most famous weapons, so join us as we rank 25. But the most bizarre element to the hilt is the pommel, which is. A lightsaber was as laughable as if Master Yoda were to do the same. The diameter of the hilt is based on what will grant the best grip-to narrow or two thick and a sudden jolt (ie-by deflecting/parrying something else be it a blaster-bolt or another sabre) could knock it out of the hand. The length of the hilt is likewise dictated by being able to hold it with two hands with ease.

Lightsaber hilts were the basic, all-encompassing part of a lightsaber. A combination handgrip, blade emitter, activator switch and power source, it held within the inner workings of the weapon that allowed it to produce its distinctive energy-based blade. The first hilts were produced as early as the advent of the lightsaber itself, approximately 15,500 BBY; though cumbersome and requiring a backpack-mounted power source, the Jedi Order nonetheless began to embrace the technology. Eventually these hilts evolved to only require a small belt-mounted pack, and again to a fully self-contained weapon system; such designs saw service as early as 5000 BBY at the start of the Great Hyperspace War. Over the thousands of years that followed, power technology and indeed the construction of lightsaber hilts continued to evolve, eventually encompassing shotos, shorter hilts used in the off-hand, as well as double-bladed, curved-hilt, and dual-phase designs. There are many unique hilts, such as the lightsaber hilt of Gungi, a JediInitiate. His hilt was made from the wood of a Brylark tree, which is as strong as metal.

Both the Jedi and the Sith Order used lightsaber hilts; the former regarding them as tools rather than weapons, while the latter sought to use their sabers to fuel their quest for power. Both Orders saw the construction of a lightsaber hilt to be one of the primary stages of a being's development within their ranks, mostly signifying that a Padawan or apprentice was ready to ascend to the next level. Though double-bladed hilts were typically associated with the Sith, practitioners of the dark side of the Force, those who followed the light side occasionally preferred these over the commonly-accepted use of single hilts in battle. Despite twoattempts to eradicate the Jedi, the technology of lightsaber hilts continued to live on as the Order that had originally supported them rose anew. In addition, other Force-using traditions, such as the Jensaarai, constructed lightsaber hilts.

Technology and constructionEdit

ComponentsEdit

A lightsaber hilt contained many components, all of which were hand-selected by the Force-user who constructed it and tuned to be in harmony with each other at the completion of the weapon's creation. From focusing lens to pommel cap,^[1] such components typically included a blade emitter shroud, magnetic stabilizing loop followed by a ring tuning flange^[2] to ensure that the activated blade did not in turn burn through the hilt.^[1] Immediately below and mounted internally lay the blade arc tip, followed on the outside by the blade power adjustment and blade length adjustment knobs. Following the arc tip were mounted the blade energy channel which was nested amongst the cycling field energizers. Within the crystal energy chamber below this lay the focusing crystals, the focusing crystal activator and the primary crystal which was attached to the primary crystal mount and situated between the lightsaber energy gate.^[2]

The primary crystal mount was in turn connected to the diatium power cell, which served as the primary power source of the weapon.^[1][2] The power cell was in turn wrapped beneath the power field conductor, power vortex ring and an inert power insulator. Rounding out the components that went into a typical hilt were the handgrip connector and a sturdy belt ring.^[2]

Gathering the various components to construct a lightsaber was relatively simple, given the utilitarian nature of the materials involved; typically, these were readily available commercially, with the exception of the crystals.^[1] In the pre-Ruusan Jedi Order, such crystals could be found within Force-sensitive locations from across the galaxy; these were typically places that resonated with a powerful dark or light-side presence in the Force. In the wake of the New Sith Wars, however, the Jedi chose to limit their crystal harvesting to the frigid world of Ilum, which brimmed with Adegan crystals that only produced blue and green blades. In the New Jedi Order this restriction was not carried through, and Jedi of that era once again used a wide variety of gemstones that produced different-colored blades.^[3]

AssemblyEdit

Nearly every lightsaber hilt was unique in its construction, born of the Force-user who created it and using whatever materials were at hand; typically, such weapons were created over a span of months.^[1] Ideally, the Jedi or Sith who created it would go into deep Meditation, poring over each individual component to be added and thus forging a connection with it through the Force.

While the individual components of a lightsaber were relatively common and could be mass-produced, aligning them and the crystals required a supernaturally-steady hand guided by the Force. No attempt to mass-produce lightsabers ever succeeded.^[4]

Types of hiltsEdit

Though each hilt was unique to the Force-user who created it, a number of basic designs evolved over the millennia. Included among these were the shoto, a shorter design that was balanced to allow a Jedi or Sith to use it comfortably in the off-hand;^[5] the curved-hilt lightsaber, which was developed to accommodate the needs of Form II: Makashi;^[6] the double-bladed lightsaber, also known as the saberstaff, which projected a beam from each end of the hilt;^[7] and, least common of all, the dual-phase lightsaber. Dual-phase hilts were unique in that they allowed the person who had created them to adjust the beam length of their weapon; one setting typically used a standard blade length of approximately a meter or more, while the other setting could extend the blade out to three full meters. Such weapons were rare because there was no known style or practical use for the extended beam, beyond a startling surprise for an opponent.^[1]

Shotos and short lightsabersEdit

Shotos, or short lightsabers as they were known during the Old Sith Wars, were secondary weapons that served much the same purpose as a dagger in the off-hand of a combatant. They typically utilized the same components of regular lightsaber hilts, however both the hilt itself and the blade it produced were significantly shorter. Some Jedi or Sith, rather than using a normal-style lightsaber and a shoto, would instead use two shotos, one in each hand.^[8] Another style of short lightsaber, called a guard shoto, utilized a rare perpendicular grip on the hilt. Many years later, shotos would see a resurgence as another form of energy-based weapon similar to the lightsaber, the lightwhip, came to be developed. Luke Skywalker constructed and utilized his own shoto after confronting the whip utilized by Lumiya for the first time, using it to great effect the next time the pair met in combat.^[5]

Known styles of hiltEdit

• Adept^[9]
• Adjudicator^[9]
• Arbiter^[9]
• Avenger^[9]
• Champion^[9]
• Consul^[9]
• Defender^[9]
• Firebrand^[9]
• Guardian^[9]
• Praetor^[9]
• Retaliator^[9]
• Sentinel^[9]
• Vanquisher^[9]
• Vindicator^[9]

Famous hiltsEdit

• Jinsu Razor^[10]

Behind the scenesEdit

Lightsaber hilts appear, either directly or indirectly, in every work within the Star Wars library that also features lightsabers themselves. Their first reference was in the novelization of Star Wars Episode IV: A New Hope, when Obi-Wan Kenobi presents Luke Skywalker with his father's lightsaber in the farmer's hut on Tatooine. Since then they have persisted as one of the most iconic symbols of the Star Wars saga, including the films themselves and the litany of canonical and non-canonical works. In early drafts of the script for A New Hope, however, these weapons were intended to be commonplace, in that common Imperial and Rebel troopers alike used them.^[11]

Though most works that reference lightsaber construction use a more complicated method, within Star Wars: Knights of the Old Republic II: The Sith Lords, much like its predecessor, the process is markedly simplified. For instance, lightsaber construction is confined to a few simple parts and takes only 'a few hours' to accomplish.^[12] However, most other canonical sources state that construction can take up to a few months, with many more parts needed besides.^[1]

Lightsaber hilts can be seen in the real world through a number of different series of Star Wars-licensed toys. Ranging from cheap plastic hilts that 'grow' a segmented, fitted blade when a button is pressed and the hilt is 'drawn', to hilts with blades lit from within by flashlights that also emit sounds and other features, to high-quality metal hilts that mount a blade with in-built LED lights. These hilts, manufactured and marketed by companies such as Master Replicas, are sometimes used in fan-organized sparring matches, such as those seen at various Star Wars conventions. In addition, more mechanically-inclined fans produce their own hilts through the use of a metalworking lathe and inner wiring to produce lights, etc. for use in costumes. These hilts are sometimes fitted with custom 'blades' that also emit a colored light and can be used in mock lightsaber duels.

AppearancesEdit

SourcesEdit

• 'Komari Vosa' on Wizards.com(original article link, backup link)

Notes and referencesEdit

1. ↑ ^{1.01.11.21.31.41.51.6}I, Jedi
2. ↑ ^2.02.12.22.3Star Wars: The Complete Visual Dictionary
3. ↑Jedi vs. Sith: The Essential Guide to the Force
4. ↑The Essential Guide to Warfare
5. ↑ ^5.05.1Star Wars 96: Duel With a Dark Lady
6. ↑Star Wars: Episode II Attack of the Clones
7. ↑Star Wars: Episode I The Phantom Menace
8. ↑Star Wars: Knights of the Old Republic
9. ↑ ^{9.009.019.029.039.049.059.069.079.089.099.109.119.129.13}Star Wars: Jedi Knight: Jedi Academy
10. ↑Star Wars Galaxies
11. ↑Star Wars: The Annotated Screenplays
12. ↑Star Wars: Knights of the Old Republic II: The Sith Lords

Certain lightsaber hilts look as though the were designed awkwardly. Namely, Darth Vader's and Luke Skywalker's (ROTJ) hilts have a box-like section that would make gripping it difficult.

In Wookieepedia: Lightsaber hilt Assembly section,

Nearly every lightsaber hilt was unique in its construction, borne of the Force-user who created it and using whatever materials were at hand; typically, such weapons were created over a span of months. Ideally, the Jedi or Sith who created it would go into deep Meditation, poring over each individual component to be added and thus forging a connection with it through the Force.

But considering that Darth Vader and ROTJ Luke Skywalker both had robotic hands, maybe these box-like sections serve a purpose. Is this a coincidence? When Luke's robotic hand was constructed at the end of ESB, it looked like a normal human hand. I don't see what function these uncomfortable box-like piece would have in a grip of a sword-like weapon.

1 Answer

The lightsaber does not require excessive force to wield. Even a small child could swing one easily. Therefore, two-handed grips aren't needed (excepting Darth Maul's double-bladed weapon) for simple swinging, just for fancy maneuvers. The second hand helps control the blade, and for this a looser grip is better. This is likely why the second hand's position can have such difficult to hold grips - they may be used to better control the blade.

Empty Lightsaber Hilt

It's also possible they are used to more easily fit into charging stations (the novel I, Jedi mentions that lightsabers are recharged similarly to how blaster power packs are charged).

There is nothing about their mechanical limbs which requires this feature, nor does it interface with them in any meaningful way.

Ultrasabers Lightsaber Test

Each lightsaber was, indeed, custom made after a long design process. That said, there are definite styles that people follow, typically mimicking their Master (or the Jedi who instructed them in lightsaber construction) or a Jedi who's style they wanted to follow.

Machined Lightsaber

Not the answer you're looking for? Browse other questions tagged star-warsweaponjedi or ask your own question.