1. What is the Low Voltage Directive 2014/35/EU?

1. 2014/35/eu Low Voltage Directive
2. Low Voltage Directive 2014 35 Eu Harmonized Standards

The Low Voltage Directive 2014/35/EU (LVD) is a European Directive that outlines safety requirements for all electrical equipment sold within the EU - specifically, 50-100V AC or 75-1500V DC. This article describes how to comply with the Directive.

Low Voltage Directive 2014/35/EU. Anyone involved in the development and manufacture of electrical products destined for the EU in 2016 will need to demonstrate the compliance of their products with the requirements of the recast Low Voltage Directive (LVD) 2014/35/EU. This came into force 20th April 2016. 1020 rows  Low voltage (LVD) Base: Directive 2014/35/EU of the European Parliament and of the.

Low Voltage Directive 2014/35/EU With effect from 20 April 2016, the new Low Voltage Directive (LVD) 2014/35/EU will replace the predecessor Directive 2006/95/EC. The LVD applies to electrical equipment between 50 and 1000 V AC or 75 and 1500 V DC.

The purpose of the Low Voltage Directive is to ensure safe electrical equipment within a specific voltage range for European citizens. It is a standard harmonised legislation to safeguard consumers from distress or injury. Manufacturers need to make sure that:

• the product is safe for humans, animals and property,
• the equipment carries a document with it to provide consumers with appropriate usage guidance,
• the product can resist environmental conditions and is not influenced by them in such a way as to make it injurious for humans and animals.

Also, the manufacturer is required to affix CE markings, complete Declaration of Conformity and compile a technical file.

This directive covers such electrical equipment as household appliances, laser equipment, sockets and cables.

2. Directive Name

Low Voltage Directive 2014/35/EU

3. Directive Number & Download Link to Legal Directive

Directive 2014/35/EU to be downloaded from the following link:

Cara membuat program input data mahasiswa menggunakan java netbeans. P ada kesempatan kali ini Kami ingin membuat sebuah program input data mahasiswa menggunakan java NetBeans. Membuat program program input data mahasiswa cukup mudah karena program yang dibuat sederhana. Untuk membuat program input data mahasiswa Anda perlu menginstall aplikasi, seperti: NetBeans, Java Runtime Environment(JRE) dan Java Development Kit(JDK).

4. Notified Body (aka, Independent Assessment) Required?

Before a manufacturer can start with the required procedure to assess their product, it is important that they determine whether the said product requires self-assessment or a Notified Body needs to be involved.

The directive 2014/35/EU requires self-assessment of the products by the manufacturers to ensure safe and healthy electrical equipment for the European market. This directive, however, does not require specific independent notified bodies to assess any of the electrical equipment that fall under the scope of this directive.

5. Products Covered

The directive 2014/35/EU covers all the electrical items with an input or output of alternating current voltage ranging from 50 to 1000 V or direct current voltage between 75 and 1500 V.

Equipment which are used by being incorporated into other electrical equipment as well as those which work directly, all fall under the scope of this directive, provided they work in the given current voltage range.

6. Examples of Products Covered by the LVD

The type of products covered under the Low Voltage Directive, include the following:

• Electrical appliances
• Hand-held electrical home appliances
• 230 V socket outlets
• Travel adapters
• Lighting equipment
• Cables and wires

7. Examples of Products NOT Covered

Some examples of products which do not fall under this directive’s scope are as follows:

• Electrical equipment to be used for radiology and medical procedures
• Electrical equipment for explosives
• Electricity meters
• Plug and socket outlets
• Electrical equipment for goods and passenger lifts
• Radio-electrical interference

8. Enforcement & Penalties

Each EU member state is required to lay down rules on penalties for not complying with the Low Voltage product safety directive. Below you can find the penalties for member states Germany and the UK as an example. For penalties relevant to other specific EU member states, please consult that state's local legislation on product safety.

• Germany - violation of the 'Produktsicherheitsgesetz' (product safety legislation) can result in fines of €3,000 - €30,000 (§ 19) and imprisonment of up to 1 year (§ 20).
• In the UK, directive violations are are covered under Section 33 HSWA offenses and can result in an unlimited fine and up to two years imprisonment.

9. How to Comply: Requirements & Process

Protection Requirements:

The Directive’s protection requirements ask the manufacturer that the equipment be safe; to mention the manufacturer’s name, address and instructions about the safe use of the equipment on the packaging.

2014/35/eu Low Voltage Directive

Declaration of Conformity (contents)

The basic layout and content of a declaration of conformity are common for all directives, but may differ slightly for each directive.

Low Voltage Directive 2014 35 Eu Harmonized Standards

The following are required by most directives:

• Manufacturer’s name and address
• The equipment’s description and/or serial number
• Reference to relevant harmonized standards
• Reference to the specifications, where necessary, by which conformity is declared
• Details of the signatory
• The two ending digits of the year of CE mark affixation

Technical Documentation

The technical file should, at least, contain the following:

• Equipment’s general description
• Basic design and manufacturing drawings, sketches of the circuits, components etc. with their descriptions
• A list of the applied harmonized standards
• Results of the calculations and tests carried out on it
• Reports of the tests

Affixing CE Marking

When all the necessary steps have been taken, it is time to get the product affixed with a CE marking. The marking should be placed either on the equipment, packaging or instructions. The letters must be vertically equal in dimensions and must not be smaller 5 millimeters. If there are other Directives which cover the product as well, the CE marking must be affixed only when all the Directives have been met.

10. Free Template Download

For a free Declaration of Conformity template for the Low Voltage directive, please refer to the downloads section of the page below:

11. Related Directives

Some of the products that are covered by Low Voltage Directive may or may not be covered by these directives:

Electromagnetic Compatibility Directive, Ecodesign Directive, Medical Devices Directive, Machinery Directive, Atex Directive (for equipment used in explosive atmospheres), RED Directive (for radio and telecommunication directive).

12. Useful Links (testing Labs, further information)

Links you might find useful in gaining more information regarding the Low Voltage Directive.

Please enable JavaScript to view the comments powered by Disqus.

Originally published in 1973, the Low Voltage Directive (LVD) has a long history as law in the European Union (EU). Indeed, it was first adopted when the EU was referred to by its original name, the European Economic Community. It would take another two decades for a union intent on socio-political as well as economic integration to become established, and a move into the 21^st century before geographical expansion through accession of ex-Eastern bloc states. The early 1970s was also before one of the signal achievements of the EU – the European Single Market – was completed.

In this respect, the 1973 LVD was somewhat ahead of its time. It sought to harmonize safety requirements and so remove a potential non-tariff technical barrier to trade in electrical equipment before the European Commission created the “New Approach to Technical Harmonization and Standards” to help facilitate the Single Market. Of course, the LVD later became a New Approach law with all the familiar hallmarks of CE marking, presumption of conformity, preparation of technical documentation and so on.

Fundamentally, the LVD has not changed that much in its 45 year history. It has only experienced two revisions, as follows:

• Codification in 2006. This saw the European Commission propose a new Directive – Directive 2006/95/EC – to merge the 1973 Directive with legislative amendments adopted over 33 years. Directive 2006/95/EC was adopted and, in 2007, the European Commission published an accompanying set of guidelines. Although lacking the force of law, the guidelines offered interpretation and advice spanning legislative scope, the Directive’s safety requirements, conformity assessment procedures, and the relationships between the LVD and other laws.
• Recast in 2014. A legislative recast was proposed by the European Commission to align the LVD with the New Legislative Framework (NLF). The NLF evolves the New Approach such that it continues to require the specification of essential requirements in product law and recourse to standardization to determine the technical details required for implementation (i.e., creation of harmonized standards), CE marking, conformity assessment, etc. while introducing additional elements. One such additional element is the setting of different obligations depending on what businesses (“economic operators”) do within product supply chains. The proposed recast was carried into law as Directive 2014/35/EU. The European Commission subsequently published provisional guidance on the 2014 Directive, first in draft form in 2015 then as final copy in 2016.

The provisional guidance on Directive 2014/35/EU is worth reflecting upon before moving to discuss the new LVD Guide that supersedes it. If anything, the provisional guidance sought to downplay the LVD’s recast. Suggesting that there had been little substantive change to the Directive, the guidance proceeded to answer a series of questions. In doing so, it offered advice on the difference between “placing on the market” and “making available on the market,” what to do regarding placing a name and address on electrical equipment, what constitutes an unacceptable risk, what is to be included in an EU Declaration of Conformity, and clarification around dates of publication/adoption/applicability.

Mindful of this, it may be a little surprising that the new LVD Guide is more than three times the length of the 2007 guidelines. One might then expect the new LVD Guide to reflect a decade’s worth of enquiries to the European Commission from assorted stakeholders, with the outcomes of the Commission’s deliberations documented in a longer set of guidelines. Not so.

If you were already familiar with the 2007 guidelines and had kept pace with the development of the NLF, the LVD’s alignment to it in 2014, and the provisional guidance of 2014-2015, the new LVD Guide does not offer much more by way of interpretation and instruction. The length of the new LVD Guide really reflects a different approach to structuring the guidelines,essentially reproducing the Directive’s recitals and articles verbatim before commenting upon them.

What, then, are the key points of interest if you are involved in making electrical equipment for, and/or supplying this equipment to, EU Member States? This article suggests that these points emerge through consideration of four topics:

1. Scope of the LVD
2. Potential overlap with other EU product legislation
3. Generally applicable economic operator obligations
4. Obligations specific to certain economic operators (e.g., a manufacturer, a distributor)

These topics will be discussed in turn. In all cases it should be remembered that, while the LVD Guide constitutes official interpretation and advice from the European Commission, it does not have the force of law.

Scope of the LVD

The new LVD Guide offers some useful clarification. This includes the following:

• A statement that the LVD applies to all forms of supplying electrical equipment intended for the EU, regardless of the selling technique. This means that if you supply the EU market via distance selling or electronic means you are not without responsibilities.
• Regarding the LVD’s voltage rating, it is clear from the legal text that the LVD applies to all electrical equipment designed for use between 50-1000 V AC and 75-1500 V DC. The new LVD Guide clarifies that the rating is for voltage of the electrical input or output, and not to voltages that may appear inside the equipment.
• Unless the battery provides a power supply between 75 and 1500 V DC, battery operated electrical equipment is out of scope of the LVD. However, the new LVD Guide makes the point that “…any accompanying battery-charger as well as equipment with integrated power supply unit within the voltage ranges of the LVD are in the scope of the LVD.” A good example in this regard is the power supply that might be provided with a laptop; if the LVD’s voltage rating applies then it will fall within the scope of the Directive. Note that this is true for mains chargers but not for USB chargers.
• Whether or not components are in scope of the LVD has been a longstanding question for industry. The following clarification is offered in the new LVD Guide:
  • As a point of general principle, the scope of the LVD includes both electrical equipment intended for incorporation into other equipment, and equipment intended to be used directly without being incorporated.
  • However, when the safety of components largely depends on how these components are integrated into final products and what the characteristics of the products are, the LVD Guide recognizes that component manufacturers may be unable to perform safety risk assessments. In these circumstances, the LVD Guide suggests that the components are not covered by the LVD and should not be CE marked unless other CE marking legislation applies (e.g., the RoHS Directive).
  • Care should be taken with this guidance though. Seemingly, it applies to basic components such as capacitors and resistors. In contrast, transformers and electrical motors are said to be in scope of the LVD, as are lamps, starters, fuses, switches for household use, and elements of electrical installations. Even though these are often used in conjunction with other electrical equipment and have to be properly installed in order to deliver their useful function, they fall within the scope of the LVD.
• When a power cord set has not been placed on the EU market as an individual item but is instead bundled with electrical equipment in scope of the LVD, there is no need to affix the CE marking on the cord set. However, this only applies when the cord set is provided for use with the main article that it accompanies. If a cord set is placed on the EU market as a spare part or as a standalone item for use with various electrical products, it must carry the CE marking. It should also be noted that the manufacturer (or manufacturer’s authorised representative) is responsible for demonstrating that both items placed on the market (i.e., equipment and accompanying cord set) comply with the LVD.

In addition, the new LVD Guide’s Annex VII is of note. In the first instance, this lists 30 example products within or outside the scope of the LVD that provides valuable reference. In the second instance, Annex VII discusses the case of a socket outlet with switch. The advice varies depending on the type of socket outlet:

• Type E and Type F socket outlets are generally supplied without a switch, meaning they are not in scope of the LVD and should not be CE marked.
• Type E and Type F socket outlets supplied with switches (generally being a socket outlet assembly and a switch assembly supplied as a common assembly) should be CE marked.
• With Type G and Type K systems, the switched socket outlets constitute a complete assembly (i.e., a single product). These are only used as part of the national plug and socket outlet system and so are excluded from scope of the LVD and should not be CE marked.

Legislative Overlap

The new LVD Guide highlights that electrical equipment placed on the EU market may be regulated for safety in EU product legislation other than, or in addition to, the LVD. This is an important point. While the LVD exists with EU product legislation that regulates concerns like electromagnetic compatibility and energy efficiency, these laws will typically apply alongside the LVD and do not take precedence over it (the laws are regulating different matters after all). On occasion, however, other EU product legislation can take priority over the LVD when it comes to the protection of health and safety.

The new LVD Guide notes that when electrical equipment with a voltage rating that would ordinarily see it falling in scope of the LVD is also:

• a machine, meaning an assembly of linked parts or components, at least one of which moves; or
• an item of radio equipment, meaning products that intentionally emit and/or receive radio waves for purpose of radio communication and/or radio determination; or
• a part for a passenger or goods lift; or
• intended for use in potentially explosive atmospheres

Then, subject to certain caveats, other EU legislation applies and takes precedence over the LVD. These laws are, respectively, the Machinery Directive (2006/42/EC), the Radio Equipment Directive (2014/53/EU), the Lifts Directive (2014/33/EU), and the Equipment and Protective Systems intended for use in Potentially Explosive Atmospheres (“ATEX”) Directive (2014/34/EU).

Separate to the above, the new LVD Guide discusses three scenarios where the LVD’s safety requirements apply to electrical equipment with a voltage rating of 50-1000 V AC and 75-1500 V DC together with requirements of other EU product safety legislation. The scenarios are as follows:

• When the equipment is to be permanently incorporated in construction works: In this instance LVD Annex I safety objectives must be met alongside relevant Construction Products Regulation (No 305/2011) requirements. The new LVD Guide emphasizes that:

“Most importantly, products covered by harmonized standards under Regulation (EU) No 305/2011 have to be assessed in conformity with the applicable standards and be accompanied by a declaration of performance and the CE mark.

…Should these essential conditions not be met, the provisions of Regulation (EU) No 305/2011 cannot in practice be applied to the relevant electrical equipment.”

• When the equipment is intended to be a gas appliance “fitting:” The term “fitting” refers to a safety device, controlling device or regulating device and subassembly designed to be incorporated into an appliance that burns gaseous fuels and is used for cooking, heating, hot water production, refrigeration, lighting or washing. Here LVD Annex I safety objectives must be met together with Gas Appliance Regulation (No 206/426) requirements, but the LVD Guide explains that the latter is specific to “…gas related risks due to the hazards of electrical origin of the appliances or of the fittings.”
• When the equipment is intended for consumer use: Under this scenario, specific provisions of the General Product Safety Directive (2001/95/EC) apply while the LVD maintains precedence as the EU product safety law that must be complied with. Page 85 of the LVD Guide lists the applicable provisions of the General Product Safety Directive.

Generally Applicable Economic Operator Obligations

The LVD specifies obligations for economic operators, a term that spans four different business entities: manufacturers, authorised representatives of manufacturers, importers, and distributors (see Figure 1).

Under the LVD, some obligations are specific to individual entities while others have wider application. In addition, legal obligations falling upon two or more economic operators can sometimes be insufficiently detailed to account for which entity has direct responsibility for their fulfilment. The new LVD Guide recognizes where challenges arise and provides some useful advice for industry that is now discussed.

Provision of information/documentation in response to an authority

Any economic operator involved in the supply of electrical equipment falling within scope of the LVD faces the obligation to provide a competent national authority with “all the information and documentation in paper or electronic form necessary to demonstrate the conformity of the electrical equipment with [the LVD].” Providing this information and documentation should follow what the LVD terms a “reasoned request,” but this is not elaborated upon any further in the Directive.

All the economic operators also share the obligation to “cooperate with [the] authority, at its request, on any action taken to eliminate the risks posed by electrical equipment which they have placed on the market.” As the new LVD Guide acknowledges, there is no specific time limit when it comes to providing requested information and documentation. It is then suggested that this is likely to be judged on a case-by-case basis with a possible default period of 10 working days.

More interestingly, perhaps, is the comment in the LVD Guide that Member States “are free to fix a default period in their national laws,” something that does not appear to have been legislated for to date. Whether a default period is written into any national legislation in the future only time will tell. For the moment, practitioners should keep 10 working days in mind as the window for responding to an authority, should a reasoned request be received.

Translation of instructions and safety information

Manufacturers, importers and distributors share the obligation to ensure that the electrical equipment is accompanied by instructions and safety information “in a language which can be easily understood by consumers and other end-users, as determined by the Member State concerned.” However, as the new LVD Guide points out, the Directive does not state which of the three economic operators is responsible for translating the information.

The LVD Guide’s advice is to begin with a point of principle: it is for each economic operator that makes in-scope electrical equipment available in an EU Member State to ensure that instructions are available in all the languages required. Furthermore, economic operators may wish to share meeting the obligation via contractual arrangements.

The LVD Guide contextualizes this by discussing a situation in which a manufacturer provides the instructions and safety information in a set of languages applicable to the EU Member States where equipment is destined for shipment. However, if the equipment then sees movement into a market not originally intended for supply by the manufacturer, the importer and the distributor must ensure translation into the required language(s). In any case, translations are to be clear, understandable and intelligible.

Translation of the Declaration of Conformity (DoC)

Upon request by a national authority, the DoC is to be made available in the language required by the Member State in whose territory the electrical equipment is placed on the market. Just as with instructions and safety information discussed above, the LVD does not state which economic operator must fulfil this obligation (the manufacturer is to draw up the DoC, but is not necessarily obliged to translate it). Also, just as with instructions and safety information, the LVD Guide suggests that the fulfilment of the obligation is addressed in contractual arrangements between relevant entities.

Addressing formal non-compliance

Article 22 of the LVD identifies various non-compliance issues (e.g., absence of a CE marking, no DoC) that “the relevant economic operator” may be obliged to address, although it says nothing about timings. Unfortunately the new LVD Guide offers little additional direction here, merely suggesting it is for authorities to judge on a case-by-case basis and, for economic operators, good cooperation with the authorities is key.

Presumption of conformity

The presumption of conformity is only conferred when the reference of the harmonized standard is published in the EU Official Journal. Also, it is just the harmonized standard that is relevant; guidance documents on harmonized standards cannot confer the presumption of conformity.

Equipment modification and/or “own labelling” of the equipment by an importer or distributor

Under these circumstances, the LVD Guide is quite clear that the importer or distributor is considered the manufacturer and should assume the corresponding obligations. This means replacing/updating the DoC (it should be in the importer’s or distributor’s name and signed by a suitable representative of the business), but not necessarily replacing test reports, certificates and other accompanying documentation provided this remains relevant.

Obligations Specific to Certain Operators

Relevant advice from the new LVD Guide is presented in Table 1.

Economic Operator	LVD Article	Obligation	Advice Given in the LVD Guide
Manufacturer	6(1)	Electrical equipment shall be designed and manufactured in accordance with LVD safety objectives.	This applies to every single product manufactured and placed on the EU market.
	6(4)	Procedures shall exist for series production to remain in conformity with the Directive.	From page 27: …it is therefore crucial that the manufacturer monitors any changes in hardware/software, developments in applicable standards and legislation and that the state of the art is taken into account adequately. In addition, the considerations given by the manufacturer to these changes shall be reported in the technical documentation.
	6(5)	Electrical equipment shall bear a type, batch or serial number for identification purposes.	From page 28: The important point is that the numbering must allow making a clear link to the relevant documentation that demonstrates the conformity of the specific type of product, in particular the Declaration of Conformity. A barcode can also be used if this is considered by a manufacturer as an appropriate way of enabling the manufacturer to identify and trace its products.
	6(5)	Where the size or nature of the electrical equipment does not allow it, the numbering or other identifier (e.g. barcode) shall be provided on the equipment packaging or in an accompanying document.	If the information is not visible at first sight, it must be easily and safely accessible.
	6(6)	The manufacturer’s name, registered trade name or registered trade mark and the postal address at which they can be contacted shall go on the electrical equipment or, failing that, the equipment packaging or in a document accompanying the equipment.	It is up to the manufacturer to assess where the information is affixed. Relevant factors are size and physical characteristics of the equipment. Aesthetics are not deemed to be reason enough to present the information on the equipment’s packaging or in an accompanying document. From pages 28-29: The address or the country does not necessarily have to be translated into the language of the Member State where the equipment is made available on the market. However, the characters of the language used must allow identifying the origin and the name of the company. This is not possible with certain alphabets. If the information is put inside the electrical equipment, it must be easily accessible to market surveillance authorities without damaging the equipment or the need for disassembling it with specific tools.
	6(7)	Electrical equipment shall be accompanied by instructions and safety information in a language which can be easily understood by consumers and other end-users.	From page 29: The LVD does not make a distinction about who the user of the product is. Both the instructions and safety information accompanying the electrical equipment can be included in a single document. Manufacturers should implement the legal requirements of the Member States regarding languages.
	6(8)	Where the electrical equipment presents a risk, manufacturers shall immediately inform the competent national authorities.	The LVD Guide says little about assessing risk, other than it is the manufacturer’s responsibility and that the assessment should be focused upon the LVD’s Annex I safety objectives.
Authorised representative	7(1)	A manufacturer may appoint an authorised representative by a written mandate.	The LVD Guide says that this is at the choice of the manufacturer and he is not obliged to do so.
Importer	8(2)	The electrical equipment shall be accompanied by required documents.	For an importer, the required documents are only the instructions and safety information.
	8(8)	For 10 years after the electrical equipment is placed on the EU market, the importer shall keep a copy of the DoC and ensure that technical documentation can be made available.	From page 33: …the importer is advised to get formal assurance from the manufacturer that the documents will be made available when requested by the market surveillance authority. The technical documentation can be given directly by the manufacturer to the market surveillance authorities.
Distributor	9(2)	The electrical equipment shall be accompanied by required documents and by instructions and safety information.	For a distributor, the requirements are the instructions and safety information (seemingly there is no other set of required documents beyond these).
	9(2)	The distributor shall ensure that the manufacturer and the importer have complied with the requirements set out in Article 6(5) and (6) and Article 8(3).	From page 34: The distributor does not have to keep a copy of the Declaration of Conformity or the technical documentation. However he must be able to identify the manufacturer, his authorised representative, the importer or the person who has provided him with the product in order to assist the market surveillance authority in its efforts to obtain the EU Declaration of Conformity and the necessary parts of the technical documentation.

Table 1: Summary of specific obligations with corresponding LVD Guide advice

Conclusion

This article has suggested that, for economic operators, the most salient advice given in the new LVD Guide arises in the discussion of the Directive’s scope, overlap with other EU product legislation, and operators’ legal obligations. For instance, the LVD Guide clarifies that, if you are involved in supplying electrical equipment to the EU via distance selling, you will have legal responsibilities, while the LVD’s voltage rating applies to input or output, not to voltages that may appear inside the electrical equipment.

An economic operator should be aware of situations where electrical equipment with a voltage rating of 50-1000 V AC and 75-1500 V DC falls in scope of both the LVD and other EU product safety legislation (e.g., the Construction Products Regulation), or else falls in scope of EU product legislation that takes precedence over the LVD (e.g., the Machinery or Radio Equipment Directives). In the latter case, the laws will still confer a presumption of conformity if LVD harmonized standards are applied to meet electrical safety requirements, only the EU DoC must reference the law that applies (e.g., the Machinery Directive rather than the LVD in the case of electrical machinery).

Finally, LVD legal obligations vary for economic operators, with most falling upon manufacturers. The new LVD Guide offers interpretation and instruction on these obligations, clarifying when importers and distributors might take on manufacturer responsibilities among other issues.

Dr. Alex Martin is Senior Regulatory Consultant at RINA. Alex provides advice and compliance support on various regulations affecting electro-technical products, from EMCD, LVD and RED through to environmental laws like RoHS, REACH and WEEE. Alex can be reached at alex.martin@rina.org.